#
1050 PrimaSil® Binder
- Dilution - Conditioner - Fixative for
Silicate Dispersion Paints & Stains
(meets DIN 18
363 - German Standard )
PrimaSil is
a versatile product serving many purposes. It conditions
surfaces to even out variances in absorbancy, it solidifies
older lime or cement plasters as well as old masonry and
natural sand-stone with loose particles.
PrimaSil should be used to dilute #1000,
#1010 #1020 and #1035 interior & exterior silicate
dispersion paints and stains without reducing its
binder content.
PrimaSil can also be used to prepare
a primer paint by mixing it with #1000 ( interior
) or #1010 (exterior ) at a 1 : 1 ratio,
optionally plus 1 part of clean water.
|
|
| Size
in Ltrs * oz |
Price
US $ |
Price
CAN $ |
| 3.785
* 128 |
49.00 |
49.00 |
| 18.925
* 640 |
175.00 |
175.00 |
|
Note
: Mineral Paint
Prices do not include shipping costs.
|
|
INGREDIENTS:
----------------------------------------------
water,
potassium silicate, pure acrylate dispersion, ammonia
solution, polysaccharide, anionic tenside.
|
COLOURS:
----------------------------------------------
milky,
but dries clear |
SHELF-LIFE:
----------------------------------------------
2
years, if stored between + 5° and + 30° Celsius
( 41 - 85 ° F ). Reseal opened container
air-tight.
|
THINNING & CLEAN
UP:
----------------------------------------------
For
clean-up use soap and water. Protect adjacent glass
and metal surfaces from splatters. |
COVERAGE:
----------------------------------------------
6
- 10 mē / ltr. ( 220 - 375 sqft. per gal. )
Coverage can vary significantly depending on surface absorbancy |
CAUTION:
----------------------------------------------
Keep
out of reach of children.
Avoid contact with skin and eyes.
Wear protective goggles, when working overhead. |
DISCLAIMER:
------------------------------------------------------------------------------------------------
All directions given
on this website are given in good faith,
but due to the potential of unpredictable
circumstances NO LEGAL LIABILITY can be based
on its content. By purchasing this product
the buyer assumes full responsibility for
proper usage of this product, it's suitability
for the intended application and any consequential
liability arising from it's use. The manufacturer's
liability is limited to the replacement of
faulty product. |
|
|
